Sherpa BASE & PRO 30A DC Solar Charge Cable
Anderson to MC4 high-current solar charge cable for BASE & PRO power stations
The matching solar charge cable for the Sherpa BASE and PRO range. Connects an MC4-terminated solar panel to the 30A Anderson input on a BASE 2.5, BASE 5.0 or PRO 5.0 power station. 10AWG copper conductor for low loss at high charge currents, with a 30A continuous rating sized to make full use of the high-current input on these flagship units. Manufacturer-spec replacement or spare for users who want a backup, a longer setup, or a cable to leave permanently with a fixed solar array.
What it’s for
This cable connects a standard MC4-terminated solar panel to the high-current Anderson input on a Sherpa BASE 2.5, BASE 5.0 or PRO 5.0 power station. The 10AWG copper conductor and 30A rating mean you can run full solar input current with minimal voltage drop and no cable warming — important when you’re pushing a kilowatt+ of solar into the unit’s MPPT.
- Replacement — for the cable that shipped with your unit
- Spare — useful to keep a second one for fixed installs vs portable kit bag use
- Backup — if you’ve damaged or lost the original
- Longer reach — pair with an MC4 extension cable when your panels are positioned a long way from the unit
Compatibility
| Sherpa BASE 2.5 | Compatible — 30A Anderson solar input |
| Sherpa BASE 5.0 | Compatible — 30A Anderson solar input |
| Sherpa PRO 5.0 | Compatible — 30A Anderson solar input |
| Sherpa PEAK range (0.6 / 1.8 / 2.2 / 3.6) | Not compatible — PEAK range uses XT60 input. Use the supplied MC4-XT60 cable instead |
| Solar panels | Any MC4-terminated panel within the unit’s MPPT input range (check your power station’s spec for max voltage/current) |
Technical specification
| Connectors | Anderson SB30 (power station end) to MC4 male/female pair (panel end) |
| Conductor | 10AWG copper |
| Continuous current rating | 30A |
| Length | 1m |
| Compatible power stations | Sherpa BASE 2.5, BASE 5.0, PRO 5.0 |
| Compatible solar panels | Any MC4-terminated panel within the host MPPT input range |
| Warranty | 5-year standard warranty |
What’s in the box
- 1 Ă— Sherpa 30A DC Solar Charge Cable (Anderson to MC4, 1m, 10AWG)
Power station and solar panel sold separately.
Important fulfilment, delivery & warranty information
To keep things fully transparent, this product is supplied and fulfilled by one of our trusted UK-based third-party partners. It is not stocked directly at our own premises.
- Partner-fulfilled product: dispatched directly by the supplier from their own fulfilment operation
- Delivery & tracking: delivery times and courier arrangements may vary depending on supplier stock and destination — tracking details will be provided once available
- 5-year manufacturer-backed warranty: covers manufacturing defects. Warranty support is handled directly by Sherpa as the product specialist
- Support from us: if you experience any issue, please contact us first — we will help coordinate the next steps with Sherpa where required
Your statutory rights under UK consumer law are not affected. Where applicable, we will continue to act as your point of contact for order-related queries, returns guidance and support coordination.