Skip to content

TITAN 105Ah DIN (Type 096) – 12V VW T6, Custom & Camper Low-Profile Fit

Original price £380.00 - Original price £380.00
Original price
£380.00
£380.00 - £380.00
Current price £380.00
TITAN 105Ah DIN (Type 096) Lithium Leisure Battery

The 190mm low-profile drop-in for VW T6, Ford Custom & under-seat conversions

Most 105Ah lithium batteries on the market are 210–220mm tall — tall enough to clash with VW T6 or Ford Custom swivel seat mechanisms. The TITAN 105Ah is engineered into a 190mm-high Type 096 (L3) case, the exact European standard, so it slides under the seat and locks in with the factory clamp. 1,344Wh of real, usable energy, 150A continuous BMS, and a lifetime warranty from a UK family of battery specialists trading since 1948.

1,344Wh / 105Ah 190mm Low-Profile 150A BMS Lifetime Warranty
TITAN 105Ah 12V Lithium Leisure Battery in DIN Type 096 case
1,344WhReal usable energy at 12.8V
190mmHeight — clears swivel seats
150AContinuous BMS discharge
11kgvs ~40kg lead-acid

The "low-profile" specialist for VW T6 & Ford Custom

Most 105Ah lithium batteries use generic plastic cases that are 210–220mm tall. Try to fit one of those under a VW T6 or Ford Custom swivel seat and the terminals hit the seat mechanism — or you’re cutting your factory plastic battery tray to make it fit.

The TITAN 105Ah is engineered into a 190mm Type 096 (L3) case. It slides straight in under the seat, locks down with the factory clamp, and leaves clearance for the swivel mechanism. No cutting, no drilling, no aftermarket strap kits.

  • 1,344Wh usable, up to 115Ah in practice from cell-grade headroom
  • 150A continuous BMS discharge — runs 2,000W inverters and motor movers
  • 11kg — roughly a 29kg saving over the closest single lead-acid equivalent
  • Native Victron CANBUS, RS485 & NMEA2000 (set on request before dispatch)
  • Built-in heater mat — safe charging down to −20°C
  • Lifetime, transferable warranty
TITAN 105Ah dimensions diagram showing 280mm long by 175mm wide by 190mm high

Will it fit your vehicle?

The Type 096 (L3) footprint is the standard for VW Transporter, Ford Custom and many compact European leisure-battery installs. Where taller generic 105Ah lithiums won’t physically fit under the seat, this is the one that does.

VW Transporter T5 / T6 / T6.1 Direct fit — fits under driver / passenger seat, clears swivel base
Ford Transit Custom Direct fit — fits under driver (replaces secondary battery) or passenger seat
Fiat Ducato / Boxer Direct fit — factory under-floor compartment or under-seat install
Caravans (Swift, Bailey) Direct fit — direct swap for any Type 096 (L3) lead-acid
Custom camper builds (low-profile) Direct fit — same height as DIN 019 with a shorter base
Off-grid cabins / shed installs Direct fit — standard automotive footprint
Dimensions 280mm (L) × 175mm (W) × 190mm (H)
Leisure use only: designed for powering appliances and accessories. Not a starter battery — do not use to crank an engine.

The cell chemistry: LiFePO₄, prismatic, Grade A

All TITAN batteries use lithium iron phosphate (LiFePO₄) prismatic cells — the most thermally and chemically stable lithium chemistry available. No cobalt, no nickel, no off-gassing, no acid. The trade-off is a slightly lower cell voltage (3.2V per cell, 4 cells = 12.8V) and lower energy density than the NMC cells used in EVs. In return, you get lifespans that make NMC look disposable: 3,000 to 25,000 cycles depending on use, against NMC’s 1,000 to 2,500.

LiFePO₄ is now widely considered safer than lead-acid. Cells can be installed in any orientation (upright is optimum), contain no liquid electrolyte, and are fully recyclable.

Cycle life you won’t outlive

A cycle is one full discharge plus one full recharge. Cycle count scales with how deep you take each discharge:

  • 100% DoD — 3,000 cycles (~8.2 years at one cycle a day)
  • 80% DoD — 6,000 cycles
  • 50% DoD — 12,000 cycles (over 30 years of daily use)
  • 30% DoD — 15,000+ cycles
For reference, the best lead-acid gel battery tops out at 350–400 cycles at 80% DoD. A TITAN at the same depth gives 6,000 — roughly 15× the service life.

Prismatic, not cylindrical

TITAN cells are long, flat prisms that fill the rectangular case end to end. Cylindrical cells leave gaps between every cell and are much harder to repair (lots of spot welding), so TITAN pays the extra cost for prismatic and passes the capacity gain back to you — especially valuable in this compact 280mm case where every cm³ counts.

  • Aluminium cell casing disperses heat evenly — even at full 150A BMS allowance, peak cell temperatures sit around 45°C, well inside spec
  • Thermal runaway territory only starts around 100°C — nowhere near normal operation
  • Heater mats also work better with prismatic cells — every cell sits against the heating element, rather than only the outer ring of a cylindrical pack

Capacity, without the weight

Matching this 105Ah in real-world lead-acid usable capacity means two and a half Exide ER550 115Ah batteries paralleled up to 290Ah. One TITAN 105Ah replaces the lot — massive savings in space, weight and cabling, with no gassing so it can live anywhere.

We quote capacity in Wh (Watt-hours) because Ah on its own ignores chemistry. TITAN lithium delivers 100% of rated capacity. Gel manages around 90%, AGM 75%, flooded lead-acid 60%. Factor that in and a TITAN 105Ah has more than double the real-world capacity of a lead-acid battery on the same label rating.

11kg. Not 40kg.

The closest single lead-acid battery (Exide AGM EP1200, 1,200Wh AGM) weighs 40kg and takes more than twice the physical volume. A 29kg saving matters when traveling abroad, at the ferry scales, and at the pump.

99% electrically efficient

Almost every watt you put in comes back out. A great partner for solar — no wasted incoming charge — and happy to accept very high charge currents: 0 to 95% in under two hours at 100A+.

The TITAN BMS — matched, not off-the-shelf

The battery management system is the circuit board between the cells and the terminals. It’s the difference between a lithium battery that lasts 15 years and one that self-destructs in two. Most brands fit an off-the-shelf board with generic parameters. TITAN doesn’t.

The TITAN BMS is custom, with parameters tuned to the exact cell spec used. That lets the cells run right up to their real safe working limits without compromising protection. It’s also how an extra 5–10% usable capacity comes out of every cell — a 105Ah can show as 115Ah fully charged. The bonus capacity isn’t guaranteed batch to batch, but the BMS re-maps its 100% reading automatically so the app always shows what you actually have.

11 protections, all self-resetting

Over-discharge, over-voltage, under-voltage, over-current, short-circuit, over-temperature, under-temperature, cell balance faults and more. All protections are temporary — they either self-reset or clear the moment the battery is put back on charge. The 150A continuous current allowance on this model is class-leading thanks to premium MOSFETs, oversized heat sinks and properly sized internal cabling.

2,000W inverter loads — in a low-profile case

The 150A continuous BMS comfortably handles the kit serious campervan owners actually want to run off-grid:

  • 2,000W inverters: small induction hobs, microwaves, espresso machines
  • Compressor fridges & freezers: all-day cycling without BMS trips
  • Caravan motor movers: high-draw start-up loads handled cleanly
  • Diesel heaters: reliable winter operation with thermal headroom
  • LED lighting, USB charging, water pumps, TV: the daily mix of camper electrics, all on one battery

Dual active & passive cell balancing

Passive balancing is cheap: cells bleed off to each other and that’s it. Active balancing actively moves energy between cells, protecting the weakest cell from doing all the work. Most brands pick one. TITAN runs both — passive for small voltage deltas, active for larger ones. Keeps the BMS’s own power draw low while still giving the full benefit of active balancing. Automatic, most active when charging above 3.4V per cell, full effect between 90–100% SOC.

Self-heating — safely charging down to −20°C

Lithium cannot be charged below 0°C without cell damage. The built-in heater mat wraps the internal pack and kicks in automatically at around 2°C whenever there’s an incoming charge current.

  • Draws from the charger first; if the charger can’t keep up, pulls up to 3.6A from the battery itself
  • Brings cell temperature to 10°C before routing charge back to the cells
  • Expect roughly 20 extra minutes on charge time in the cold
  • Discharge is unaffected and works down to −20°C

Automatic & user hibernation

A fully discharged lithium battery left for months can be a lithium battery that doesn’t come back. Two hibernation modes prevent that:

  • Automatic hibernation: triggers after several days of inactivity at low SOC. Battery stops outputting but retains enough headroom to last around 6 months before any cell risk. Wakes up the moment you put it on charge or open the app.
  • User hibernation: triggered by the supplied on/off cable. BMS stays awake but charge and discharge are disabled. Perfect for winter storage — stops parasitic loads draining the battery over a season off the road.

Handles high inrush currents

Inverters, water pumps, motor movers and compressors can pull 1,000A+ for a microsecond on start-up. Many BMSs read that as a short circuit and trip. The TITAN is tuned to ride those spikes without nuisance shutdowns, so start-up loads behave exactly the way they did on your old lead-acid.

Inverter & device communication

Comms ports on the case let the battery talk to compatible inverters, chargers and GX devices. Defaults to Victron CANBUS (VE.CAN and BMS.CAN) and is compatible with Victron DVCC out of the box. The data mode can be switched to other brands or protocols on request — flag it in the order notes and TITAN’s engineers will set it before dispatch.

Known working with:

  • Victron GX devices (default) — CAN
  • Growatt — CAN
  • Sacolar — CAN
  • Goodwe — CAN
  • Voltronic Power — RS485
  • Sofar — CAN
  • Sorotec — CAN or RS485
  • Deye / SunSynk — CAN or RS485
  • Solis — CAN
  • Luxpower — CAN
  • Pylon Tech — CAN or RS485
  • Sol-Ark — CAN
  • SRNE — RS485
  • MUST — CAN
  • SMA — CAN
  • MEGAREVO — CAN
  • MPP Sola — RS485
  • TBB Power — CAN
  • Senergy — CAN
  • Schneider Electric — CAN
  • Aiswei — CAN
  • SMK — RS485
  • Foxess — CAN
  • SunGrow — CAN

Cable kits for every protocol are available separately — please get in touch if you need one.

Drop-in for lead-acid — 10-minute install

Designed as a direct, like-for-like replacement for DIN Type 096 lead-acid batteries. Case, terminal layout and dimensions match the lead-acid spec, so there’s no need to rework trays, straps or cable runs.

  • Charger: if your charger has no dedicated lithium preset, AGM or “Sealed” modes are accepted. Aim for max charge voltage of 14.4V
  • Split-charge relays & DC-DC chargers: compatible out of the box
  • Terminals: dual-purpose — high-performance copper round (SAE/automotive) for lead-acid clamp fitment, plus integrated M8 bolt for direct ring-terminal cabling. No adapters required.
  • Mounting: 190mm tall — clears swivel-seat mechanisms on T6 / Custom. Mount on its side for 175mm height where needed.
TITAN 105Ah dual-purpose terminal with copper round post and M8 bolt

Bluetooth monitoring & the TITAN app

Bluetooth is built in. The free TITAN app (iOS and Android, 10 languages) shows everything that matters in real time:

  • Live voltage, current in both amps and watts
  • State of charge as a percentage and in Ah
  • Individual cell voltages
  • Internal temperature
  • Estimated time to full or empty
  • Protection trip history
  • Live balancing activity

Handles multiple batteries in series or parallel and re-calculates totals automatically — whether you’ve got one 105Ah or three in parallel, the figures on screen match the actual pack.

Lifetime warranty, transferable

TITAN backs every grade-A cell battery with a warranty that lasts the lifetime of the battery — fully transferable. The parent company has been trading continuously since 1948, so they intend to be around to honour it in 20 years’ time.

What the warranty doesn’t cover is wear. All batteries lose capacity with use. LiFePO₄ is remarkably resistant: expect a 5–10% capacity drop every decade of normal use. A brand-new 105Ah shows around 115Ah fully charged, a 10-year-old 105Ah around 100Ah, a 20-year-old around 92Ah. Natural degradation isn’t a valid warranty claim — if a battery stops holding enough capacity for your use, it’s time to replace.

The warranty covers components against premature failure caused by manufacturing faults.

Cheaper than lead-acid over a decade

The TITAN 105Ah sits at around £380 new. Over its 10-year design life that’s ~£38 a year.

The closest lead-acid equivalent — Exide AGM EP1200 — is around £350 with a 4-year design life, which means replacing it roughly 2.5 times over the same period. Call it £88 a year, with cascading labour each replacement.

Around £480 saved over 10 years, before you factor in the weight, volume and efficiency benefits. In practice most TITAN customers see 15–20 years out of a single battery.

Module-based repair, not landfill

If something fails, TITAN repairs the failed module — BMS, balance board, a single cell — rather than replace the whole battery. Lower cost, lower carbon footprint, faster turnaround. As a family of battery specialists trading since 1948, there isn’t much they haven’t already rebuilt.

Full technical specification

Nominal voltage 12.8V
Capacity 105Ah (1,344Wh) — up to 115Ah real-world from cell-grade headroom
Internal resistance <10mΩ
Round-trip efficiency 99%
Self-discharge <2% per month (in hibernation)
Cell chemistry LiFePO₄ lithium iron phosphate
Cell type Prismatic Grade A automotive cells
BMS continuous discharge 150A
BMS peak discharge 170A
Maximum charge rate 150A
Recommended charge rate 10A to 50A
Recommended charge voltage 13.8V to 14.4V
Maximum charge voltage 14.6V
Low-voltage disconnect 10.5V
Short-circuit protection 1,000A @ <500µs
Maximum connections 4 in series (48V) & 8 in parallel (840Ah)
Discharge temperature range −20°C to 60°C
Charge temperature range −20°C to 50°C (heater enabled)
Heater activation ≤3°C and on charge
Heater target temperature 5°C to 10°C
Heater consumption 5.6A / 80W (±5%)
Cell balance method Active & passive (dual)
Default comms protocol RS485 (1363.3) & Victron CANBUS (VE.CAN & BMS.CAN)
Other compatible protocols CANBUS, RS485 (MODBUS) & NMEA2000 (set on request)
Victron DVCC compatible Yes via BMS.CAN
Bluetooth monitoring Built in — free TITAN app for iOS & Android (10 languages)
Dimensions 280mm (L) × 175mm (W) × 190mm (H) — Type 096 (L3) DIN case
Weight 11kg
Case material ABS plastic (reinforced PVC DIN case)
Enclosure rating IP65
Terminal type Dual-purpose copper round post + integrated M8 bolt
Type approvals UN38.3, CE, RoHS, UKCA, UN ECE R10 (E-Mark), EMC
Designed & tested in Cheltenham, UK by Groves Batteries Ltd (est. 1948)

What’s in the box

  • 1 × TITAN 105Ah Lithium Leisure Battery
  • 1 × Hibernation cable (for user-mode storage hibernation)
  • 1 × Terminator (for inverter communications)
  • 1 × Set of M8 bolts
  • 1 × User manual

Important fulfilment, delivery & warranty information

To keep things fully transparent, this product is supplied and fulfilled by one of our trusted UK-based third-party partners. It is not stocked directly at our own premises.

  • Partner-fulfilled product: dispatched directly by the supplier from their own fulfilment operation
  • Delivery & tracking: delivery times and courier arrangements may vary depending on supplier stock, item size and destination — tracking details will be provided once available
  • Manufacturer-backed lifetime warranty: warranty support, diagnostics and module-based repairs are handled directly by TITAN’s engineers in Cheltenham (Groves Batteries Ltd, trading continuously since 1948)
  • Custom comms protocol setup: if you need a non-default protocol (anything other than the standard Victron CANBUS), let us know in the order notes and we’ll arrange it with TITAN’s engineers before dispatch
  • Support from us: if you experience any issue, please contact us first — we will help coordinate the next steps with TITAN where required

Your statutory rights under UK consumer law are not affected. Where applicable, we will continue to act as your point of contact for order-related queries, returns guidance and support coordination.